Sudo pop

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
Line 30: Line 30:
 
Brewing at 90C may be too hot.  Next pass should be done at 80C but still for 10 minutes.
 
Brewing at 90C may be too hot.  Next pass should be done at 80C but still for 10 minutes.
  
'''adjustments for batch #2'''
+
<u>'''adjustments for batch #2'''</u>
 +
 
 
* Reduce yerba mate to 100ml by volume.
 
* Reduce yerba mate to 100ml by volume.
 
* Reduce cane sugar syrup to 25ml  
 
* Reduce cane sugar syrup to 25ml  

Revision as of 20:50, 10 April 2009

Did you notice most rootbeer is caffeine free? The goal here is to have fun brewing a non-alcoholic caffeinated rootbeer or ginger ale. To that end we are making the first batches of a Noisebridge label yerba mate-niated rootbrew, gratis and DIY

Contents

Recipe

A recipe hasn't been finalized yet. For the first few batches, carbonators will be used, later natural carbonation will be explored.

Supplies

  • Syrup for 4 gallon batches of ginger ale and root beer
  • Taragui Mate con Palo
  • 5 Gallon Carboy (secondary fermentation)
  • 5 Gallon Pot
  • Bottle siphon, bottle capper, caps
  • 5 Gallon (Primary fermentation or mixing) bucket
  • airlocks, and miscellaneous brewing supplies

History

  • 04/03/2009 bottle prep, supplies consolidation, and soda pop/ Y. Mate recipe & brewing research
3 dozen bottles prepped.

Experimentation=

MartinBogomolni: Experiment series #1 (4/10/2009)

  • 1 liter water
  • coffee filter (unbleached, melitta #5)
  • 250ml by volume of Yerba Mate (Taragui : elaborada con palo)
  • 50ml of cane sugar syrup (obtained at Whole Foods)
  • 1 liter seltzer bottle w/ co2 cartridge for carbonation

Brought water to 90C, and added cold-rinsed yerba mate tea contained in polymesh teabag for 10 minutes of steeping time. Removed bag, and ran through a common coffee filter to remove sediment into the glass seltzer bottle. Added 50ml of cane sugar syrup and set aside to cool to room temperature. Capped bottle and left in fridge for 30 minutes to cool.

Result was mildly astringent, similar in flavor profile to Club-Mate but perhaps a bit sweeter. After adding CO2, the slight acidity of the soda countered the sweetness. When served from the selzer bottle, however, the soda was extremely foamy. May have to add an agent that makes the soda more tart, but without adding a flavor like lemon does.

Brewing at 90C may be too hot. Next pass should be done at 80C but still for 10 minutes.

adjustments for batch #2

  • Reduce yerba mate to 100ml by volume.
  • Reduce cane sugar syrup to 25ml
  • 5g of fresh lemon zest (for tartness)

Added lemon zest to mate before steeping. Allowed 10 minutes of steeping time, followed procedure from earlier experiment.

Result is still mildly astringent, but sweetness profile is much closer to Club-Mate. Lemon flavor is not right, but not unpleasant, as a tartening agent. Using the seltzer bottle is not the right way to add carbonation, the resulting soda is still far too foamy. Transferred soda from seltzer bottle into clean 1 liter glass mineral water bottle then capped.

Personal tools