SpaceBridge comprehensive TODO list
Jump to navigation
Jump to search
TODO
- make outline of how things fit into the compartments
- assemble the antenna for GPRS
- antenna for video
- Best thing is to just have the transmitter and the antenna inside one of the compartments
- assemble GPRS GPS tracking system (details only known to Brian etc.)
- assemble and mount phone
- connect blinking circuit to the three position lights
- have Mark have a look at the circuit
- mount battery holders
- Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
- isolate intervalometer electrically
- maybe buy Kapton tape(?)
- buy velcro for mounting electronics in box
- buy helium tank
- mount video equipment
- mount 12V power supply
- fix the position of the video camera (needs to get into launch checklist!)
- 2x cinch male-male adapters
- glue plastic sheets that came loose
- charge video battery fully and measure full voltage
- replace batteries in blinker before launch (shorting)
- replace canon camera battery
- put failed minimal launch data (track on google maps etc.) onto the wiki
- put callsign and "if found, please call XXX" onto the unit
Completed Tasks
- enlarge hole for video camera so that there is not plastics in the field of view
- put this list onto the wiki, also the launch prep check list
- mount canon camera to faceplate
- prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)