SpaceBridge comprehensive TODO list
- make outline of how things fit into the compartments
- enlarge hole for video camera so that there is not plastics in the field of view
- mount canon camera to faceplate
done: X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!) - assemble the antenna for GPRS X antenna for video
-> Best thing it to just have the transmitter and the antenna inside one of the compartments
- assemble GPRS GPS tracking system (details only known to Brian etc.) - assemble/mount phone - connect blinking circuit to the three position lights
- have Mark have a look at the circuit - mount battery holders -> Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
- isolate intervalometer electrically - maybe buy Kapton tape(?) - buy velcro for mounting electronics in box - buy helium tank -X mount video equipment X mount 12V power supply X fix the position of the video camera (needs to get into launch checklist!) 2x cinch male-male adapters - glue plastic sheets that came loose - charge video battery fully and measure full voltage - replace batteries in blinker before launch (shorting) - replace canon camera battery - put this list onto the wiki, also the launch prep check list - access list - put failed minimal launch data (track on google maps etc.) onto the wiki