SpaceBridge comprehensive TODO list

• make outline of how things fit into the compartments

• enlarge hole for video camera so that there is not plastics in the field of view
• mount canon camera to faceplate
• X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
• assemble the antenna for GPRS
• antenna for video * Best thing it to just have the transmitter and the antenna inside one of

 the compartments                                                                                                                             

• assemble GPRS GPS tracking system (details only known to Brian etc.)
• assemble/mount phone
• connect blinking circuit to the three position lights

  * have Mark have a look at the ircuit                                                                                                      
  * mount battery holders                                                                                                               * Finding about blinking circuit: It is just switching on/off two fully                                                                     
 charged AA cells and is certainly not the best way to do it. All three LEDs
 on the payload are connected in parallel.

• isolate intervalometer electrically
• maybe buy Kapton tape(?)
• buy velcro for mounting electronics in box
• buy helium tank
• mount video equipment
• mount 12V power supply
• fix the position of the video camera (needs to get into launch checklist!)
• 2x cinch male-male adapters
• glue plastic sheets that came loose
• charge video battery fully and measure full voltage
• replace batteries in blinker before launch (shorting)
• replace canon camera battery
• put this list onto the wiki, also the launch prep check list
• access list
• put failed minimal launch data (track on google maps etc.) onto the wiki