SpaceBridge comprehensive TODO list: Difference between revisions
Jump to navigation
Jump to search
Marcus10110 (talk | contribs) No edit summary |
Marcus10110 (talk | contribs) No edit summary |
||
(3 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
== TODO == | |||
* make outline of how things fit into the compartments | * make outline of how things fit into the compartments | ||
* assemble the antenna for GPRS | * assemble the antenna for GPRS | ||
* antenna for video | * antenna for video | ||
* Best thing | ** Best thing is to just have the transmitter and the antenna inside one of the compartments | ||
* assemble GPRS GPS tracking system (details only known to Brian etc.) | * assemble GPRS GPS tracking system (details only known to Brian etc.) | ||
* assemble | |||
* assemble and mount phone | |||
* connect blinking circuit to the three position lights | * connect blinking circuit to the three position lights | ||
** have Mark have a look at the circuit | ** have Mark have a look at the circuit | ||
** mount battery holders | ** mount battery holders | ||
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel. | ** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel. | ||
* isolate intervalometer electrically | * isolate intervalometer electrically | ||
* maybe buy Kapton tape(?) | * maybe buy Kapton tape(?) | ||
* buy velcro for mounting electronics in box | * buy velcro for mounting electronics in box | ||
* buy helium tank | * buy helium tank | ||
* mount video equipment | * mount video equipment | ||
* mount 12V power supply | * mount 12V power supply | ||
* fix the position of the video camera (needs to get into launch checklist!) | * fix the position of the video camera (needs to get into launch checklist!) | ||
* 2x cinch male-male adapters | * 2x cinch male-male adapters | ||
* glue plastic sheets that came loose | * glue plastic sheets that came loose | ||
* charge video battery fully and measure full voltage | * charge video battery fully and measure full voltage | ||
* replace batteries in blinker before launch (shorting) | * replace batteries in blinker before launch (shorting) | ||
* replace canon camera battery | * replace canon camera battery | ||
* put failed minimal launch data (track on google maps etc.) onto the wiki | * put failed minimal launch data (track on google maps etc.) onto the wiki | ||
Completed | * put callsign and "if found, please call XXX" onto the unit | ||
* weight completed payload | |||
* buy/find lithium batteries for: | |||
** D cell for light | |||
** AA's for LEDs | |||
**lithium 9v for tracker | |||
== Completed Tasks == | |||
* enlarge hole for video camera so that there is not plastics in the field of view | * enlarge hole for video camera so that there is not plastics in the field of view | ||
* put this list onto the wiki, also the launch prep check list | * put this list onto the wiki, also the launch prep check list | ||
* mount canon camera to faceplate | |||
* prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!) |
Latest revision as of 19:08, 17 July 2011
TODO[edit]
- make outline of how things fit into the compartments
- assemble the antenna for GPRS
- antenna for video
- Best thing is to just have the transmitter and the antenna inside one of the compartments
- assemble GPRS GPS tracking system (details only known to Brian etc.)
- assemble and mount phone
- connect blinking circuit to the three position lights
- have Mark have a look at the circuit
- mount battery holders
- Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
- isolate intervalometer electrically
- maybe buy Kapton tape(?)
- buy velcro for mounting electronics in box
- buy helium tank
- mount video equipment
- mount 12V power supply
- fix the position of the video camera (needs to get into launch checklist!)
- 2x cinch male-male adapters
- glue plastic sheets that came loose
- charge video battery fully and measure full voltage
- replace batteries in blinker before launch (shorting)
- replace canon camera battery
- put failed minimal launch data (track on google maps etc.) onto the wiki
- put callsign and "if found, please call XXX" onto the unit
- weight completed payload
- buy/find lithium batteries for:
- D cell for light
- AA's for LEDs
- lithium 9v for tracker
Completed Tasks[edit]
- enlarge hole for video camera so that there is not plastics in the field of view
- put this list onto the wiki, also the launch prep check list
- mount canon camera to faceplate
- prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)