SpaceBridge comprehensive TODO list

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
== TODO ==
 
* make outline of how things fit into the compartments
 
* make outline of how things fit into the compartments
* mount canon camera to faceplate
+
 
* X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
+
 
* assemble the antenna for GPRS
 
* assemble the antenna for GPRS
 +
 
* antenna for video
 
* antenna for video
* Best thing it to just have the transmitter and the antenna inside one of the compartments
+
** Best thing is to just have the transmitter and the antenna inside one of the compartments
 +
 
 
* assemble GPRS GPS tracking system (details only known to Brian etc.)
 
* assemble GPRS GPS tracking system (details only known to Brian etc.)
* assemble/mount phone
+
 
 +
* assemble and mount phone
 +
 
 
* connect blinking circuit to the three position lights
 
* connect blinking circuit to the three position lights
 
** have Mark have a look at the circuit
 
** have Mark have a look at the circuit
 
** mount battery holders
 
** mount battery holders
 
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
 
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
 +
 
* isolate intervalometer electrically
 
* isolate intervalometer electrically
 +
 
* maybe buy Kapton tape(?)
 
* maybe buy Kapton tape(?)
 +
 
* buy velcro for mounting electronics in box
 
* buy velcro for mounting electronics in box
 +
 
* buy helium tank
 
* buy helium tank
 +
 
* mount video equipment
 
* mount video equipment
 +
 
* mount 12V power supply
 
* mount 12V power supply
 +
 
* fix the position of the video camera (needs to get into launch checklist!)
 
* fix the position of the video camera (needs to get into launch checklist!)
 +
 
* 2x cinch male-male adapters
 
* 2x cinch male-male adapters
 +
 
* glue plastic sheets that came loose
 
* glue plastic sheets that came loose
 +
 
* charge video battery fully and measure full voltage
 
* charge video battery fully and measure full voltage
 +
 
* replace batteries in blinker before launch (shorting)
 
* replace batteries in blinker before launch (shorting)
 +
 
* replace canon camera battery
 
* replace canon camera battery
 +
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
  
Completed tasks:
+
* put callsign and "if found, please call XXX" onto the unit
 +
 
 +
* weight completed payload
 +
 
 +
* buy/find lithium batteries for:
 +
** D cell for light
 +
** AA's for LEDs
 +
**lithium 9v for tracker
 +
 
 +
== Completed Tasks ==
 
* enlarge hole for video camera so that there is not plastics in the field of view
 
* enlarge hole for video camera so that there is not plastics in the field of view
 +
 
* put this list onto the wiki, also the launch prep check list
 
* put this list onto the wiki, also the launch prep check list
 +
 +
* mount canon camera to faceplate
 +
 +
* prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)

Latest revision as of 19:08, 17 July 2011

[edit] TODO

  • make outline of how things fit into the compartments
  • assemble the antenna for GPRS
  • antenna for video
    • Best thing is to just have the transmitter and the antenna inside one of the compartments
  • assemble GPRS GPS tracking system (details only known to Brian etc.)
  • assemble and mount phone
  • connect blinking circuit to the three position lights
    • have Mark have a look at the circuit
    • mount battery holders
    • Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
  • isolate intervalometer electrically
  • maybe buy Kapton tape(?)
  • buy velcro for mounting electronics in box
  • buy helium tank
  • mount video equipment
  • mount 12V power supply
  • fix the position of the video camera (needs to get into launch checklist!)
  • 2x cinch male-male adapters
  • glue plastic sheets that came loose
  • charge video battery fully and measure full voltage
  • replace batteries in blinker before launch (shorting)
  • replace canon camera battery
  • put failed minimal launch data (track on google maps etc.) onto the wiki
  • put callsign and "if found, please call XXX" onto the unit
  • weight completed payload
  • buy/find lithium batteries for:
    • D cell for light
    • AA's for LEDs
    • lithium 9v for tracker

[edit] Completed Tasks

  • enlarge hole for video camera so that there is not plastics in the field of view
  • put this list onto the wiki, also the launch prep check list
  • mount canon camera to faceplate
  • prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
Personal tools