SpaceBridge comprehensive TODO list: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
No edit summary
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
== TODO ==
* make outline of how things fit into the compartments
* make outline of how things fit into the compartments


* enlarge hole for video camera so that there is not plastics in the field of view
* mount canon camera to faceplate
* X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
* assemble the antenna for GPRS
* assemble the antenna for GPRS
* antenna for video
* antenna for video
* Best thing it to just have the transmitter and the antenna inside one of the compartments
** Best thing is to just have the transmitter and the antenna inside one of the compartments
 
* assemble GPRS GPS tracking system (details only known to Brian etc.)
* assemble GPRS GPS tracking system (details only known to Brian etc.)
* assemble/mount phone
 
* assemble and mount phone
 
* connect blinking circuit to the three position lights
* connect blinking circuit to the three position lights
** have Mark have a look at the circuit
** have Mark have a look at the circuit
** mount battery holders
** mount battery holders
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
* isolate intervalometer electrically
* isolate intervalometer electrically
* maybe buy Kapton tape(?)
* maybe buy Kapton tape(?)
* buy velcro for mounting electronics in box
* buy velcro for mounting electronics in box
* buy helium tank
* buy helium tank
* mount video equipment
* mount video equipment
* mount 12V power supply
* mount 12V power supply
* fix the position of the video camera (needs to get into launch checklist!)
* fix the position of the video camera (needs to get into launch checklist!)
* 2x cinch male-male adapters
* 2x cinch male-male adapters
* glue plastic sheets that came loose
* glue plastic sheets that came loose
* charge video battery fully and measure full voltage
* charge video battery fully and measure full voltage
* replace batteries in blinker before launch (shorting)
* replace batteries in blinker before launch (shorting)
* replace canon camera battery
* replace canon camera battery
* put failed minimal launch data (track on google maps etc.) onto the wiki
* put callsign and "if found, please call XXX" onto the unit
* weight completed payload
* buy/find lithium batteries for:
** D cell for light
** AA's for LEDs
**lithium 9v for tracker
== Completed Tasks ==
* enlarge hole for video camera so that there is not plastics in the field of view
* put this list onto the wiki, also the launch prep check list
* put this list onto the wiki, also the launch prep check list
* access list
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
* mount canon camera to faceplate
 
* prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)

Latest revision as of 19:08, 17 July 2011

TODO[edit]

  • make outline of how things fit into the compartments
  • assemble the antenna for GPRS
  • antenna for video
    • Best thing is to just have the transmitter and the antenna inside one of the compartments
  • assemble GPRS GPS tracking system (details only known to Brian etc.)
  • assemble and mount phone
  • connect blinking circuit to the three position lights
    • have Mark have a look at the circuit
    • mount battery holders
    • Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
  • isolate intervalometer electrically
  • maybe buy Kapton tape(?)
  • buy velcro for mounting electronics in box
  • buy helium tank
  • mount video equipment
  • mount 12V power supply
  • fix the position of the video camera (needs to get into launch checklist!)
  • 2x cinch male-male adapters
  • glue plastic sheets that came loose
  • charge video battery fully and measure full voltage
  • replace batteries in blinker before launch (shorting)
  • replace canon camera battery
  • put failed minimal launch data (track on google maps etc.) onto the wiki
  • put callsign and "if found, please call XXX" onto the unit
  • weight completed payload
  • buy/find lithium batteries for:
    • D cell for light
    • AA's for LEDs
    • lithium 9v for tracker

Completed Tasks[edit]

  • enlarge hole for video camera so that there is not plastics in the field of view
  • put this list onto the wiki, also the launch prep check list
  • mount canon camera to faceplate
  • prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)