SpaceBridge comprehensive TODO list

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 
* make outline of how things fit into the compartments                                                                                         
 
* make outline of how things fit into the compartments                                                                                         
* enlarge hole for video camera so that there is not plastics in the field of view                                                                                                                                        
+
* enlarge hole for video camera so that there is not plastics in the field of view                                                                                                                                    
*mount canon camera to faceplate                                                                                                               
+
* mount canon camera to faceplate                                                                                                               
done: X prepare new Y adapter (done, although the pins have to be bent a bit                                                                   
+
* X prepare new Y adapter (done, although the pins have to be bent a bit                                                                   
 
for safe contact!)                                                                                                                             
 
for safe contact!)                                                                                                                             
- assemble the antenna for GPRS                                                                                                                 
+
* assemble the antenna for GPRS                                                                                                                 
X antenna for video                                                                                                                             
+
* antenna for video                                                                                                                             
 
   -> Best thing it to just have the transmitter and the antenna inside one of                                                                   
 
   -> Best thing it to just have the transmitter and the antenna inside one of                                                                   
 
   the compartments                                                                                                                             
 
   the compartments                                                                                                                             
- assemble GPRS GPS tracking system (details only known to Brian etc.)                                                                         
+
assemble GPRS GPS tracking system (details only known to Brian etc.)                                                                         
- assemble/mount phone                                                                                                                         
+
* assemble/mount phone                                                                                                                         
- connect blinking circuit to the three position lights                                                                                         
+
* connect blinking circuit to the three position lights                                                                                         
   - have Mark have a look at the circuit                                                                                                       
+
   * have Mark have a look at the circuit                                                                                                       
   - mount battery holders                                                                                                                     
+
   * mount battery holders                                                                                                                     
 
   -> Finding about blinking circuit: It is just switching on/off two fully                                                                     
 
   -> Finding about blinking circuit: It is just switching on/off two fully                                                                     
 
   charged AA cells and is certainly not the best way to do it. All three LEDs
 
   charged AA cells and is certainly not the best way to do it. All three LEDs
 
   on the payload are connected in parallel.
 
   on the payload are connected in parallel.
- isolate intervalometer electrically
+
* isolate intervalometer electrically
- maybe buy Kapton tape(?)
+
* maybe buy Kapton tape(?)
- buy velcro for mounting electronics in box
+
* buy velcro for mounting electronics in box
- buy helium tank
+
* buy helium tank
-X mount video equipment
+
* mount video equipment
X mount 12V power supply
+
* mount 12V power supply
X fix the position of the video camera (needs to get into launch checklist!)
+
* fix the position of the video camera (needs to get into launch checklist!)
2x cinch male-male adapters
+
* 2x cinch male-male adapters
- glue plastic sheets that came loose
+
* glue plastic sheets that came loose
- charge video battery fully and measure full voltage
+
* charge video battery fully and measure full voltage
- replace batteries in blinker before launch (shorting)
+
* replace batteries in blinker before launch (shorting)
- replace canon camera battery
+
* replace canon camera battery
- put this list onto the wiki, also the launch prep check list
+
* put this list onto the wiki, also the launch prep check list
- access list
+
* access list
- put failed minimal launch data (track on google maps etc.) onto the wiki
+
* put failed minimal launch data (track on google maps etc.) onto the wiki

Revision as of 17:02, 17 July 2011

  • make outline of how things fit into the compartments
  • enlarge hole for video camera so that there is not plastics in the field of view
  • mount canon camera to faceplate
  • X prepare new Y adapter (done, although the pins have to be bent a bit

for safe contact!)

  • assemble the antenna for GPRS
  • antenna for video
 -> Best thing it to just have the transmitter and the antenna inside one of                                                                  
 the compartments                                                                                                                             
  • assemble GPRS GPS tracking system (details only known to Brian etc.)
  • assemble/mount phone
  • connect blinking circuit to the three position lights
  * have Mark have a look at the circuit                                                                                                      
  * mount battery holders                                                                                                                     
 -> Finding about blinking circuit: It is just switching on/off two fully                                                                     
 charged AA cells and is certainly not the best way to do it. All three LEDs
 on the payload are connected in parallel.
  • isolate intervalometer electrically
  • maybe buy Kapton tape(?)
  • buy velcro for mounting electronics in box
  • buy helium tank
  • mount video equipment
  • mount 12V power supply
  • fix the position of the video camera (needs to get into launch checklist!)
  • 2x cinch male-male adapters
  • glue plastic sheets that came loose
  • charge video battery fully and measure full voltage
  • replace batteries in blinker before launch (shorting)
  • replace canon camera battery
  • put this list onto the wiki, also the launch prep check list
  • access list
  • put failed minimal launch data (track on google maps etc.) onto the wiki
Personal tools