Editing SpaceBridge comprehensive TODO list

== TODO ==
* make outline of how things fit into the compartments

* assemble the antenna for GPRS

* antenna for video
** Best thing is to just have the transmitter and the antenna inside one of the compartments

* assemble GPRS GPS tracking system (details only known to Brian etc.)

* assemble and mount phone

* connect blinking circuit to the three position lights
** have Mark have a look at the circuit
** mount battery holders
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.

* isolate intervalometer electrically

* maybe buy Kapton tape(?)

* buy velcro for mounting electronics in box

* buy helium tank

* mount video equipment

* mount 12V power supply

* fix the position of the video camera (needs to get into launch checklist!)

* 2x cinch male-male adapters

* glue plastic sheets that came loose

* charge video battery fully and measure full voltage

* replace batteries in blinker before launch (shorting)

* replace canon camera battery

* put failed minimal launch data (track on google maps etc.) onto the wiki


== Completed Tasks ==
* enlarge hole for video camera so that there is not plastics in the field of view

* put this list onto the wiki, also the launch prep check list

* mount canon camera to faceplate

* prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)