Editing SpaceBridge comprehensive TODO list
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 1: | Line 1: | ||
* make outline of how things fit into the compartments | * make outline of how things fit into the compartments | ||
* enlarge hole for video camera so that there is not plastics in the field of view | |||
* mount canon camera to faceplate | |||
* X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!) | |||
* assemble the antenna for GPRS | * assemble the antenna for GPRS | ||
* antenna for video | * antenna for video | ||
* Best thing it to just have the transmitter and the antenna inside one of the compartments | |||
* assemble GPRS GPS tracking system (details only known to Brian etc.) | * assemble GPRS GPS tracking system (details only known to Brian etc.) | ||
* assemble/mount phone | |||
* assemble | |||
* connect blinking circuit to the three position lights | * connect blinking circuit to the three position lights | ||
** have Mark have a look at the circuit | ** have Mark have a look at the circuit | ||
** mount battery holders | ** mount battery holders | ||
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel. | ** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel. | ||
* isolate intervalometer electrically | * isolate intervalometer electrically | ||
* maybe buy Kapton tape(?) | * maybe buy Kapton tape(?) | ||
* buy velcro for mounting electronics in box | * buy velcro for mounting electronics in box | ||
* buy helium tank | * buy helium tank | ||
* mount video equipment | * mount video equipment | ||
* mount 12V power supply | * mount 12V power supply | ||
* fix the position of the video camera (needs to get into launch checklist!) | * fix the position of the video camera (needs to get into launch checklist!) | ||
* 2x cinch male-male adapters | * 2x cinch male-male adapters | ||
* glue plastic sheets that came loose | * glue plastic sheets that came loose | ||
* charge video battery fully and measure full voltage | * charge video battery fully and measure full voltage | ||
* replace batteries in blinker before launch (shorting) | * replace batteries in blinker before launch (shorting) | ||
* replace canon camera battery | * replace canon camera battery | ||
* put this list onto the wiki, also the launch prep check list | |||
* access list | |||
* put failed minimal launch data (track on google maps etc.) onto the wiki | * put failed minimal launch data (track on google maps etc.) onto the wiki | ||