Sewing: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
(131 intermediate revisions by 27 users not shown)
Line 1: Line 1:
Sewing Machines. We has them.
== '''Wednesday Night at Noisebridge''' ==


For both industrial machines, please DO NOT unthread them unless you must, to fix a snarlInstead, to remove (say) your own thread, simply cut it close to the spool so that the next person can simply tie a knot with the next thread and pull it all the way through to the needle.
We will have an evening for DIY and sewingWe will have supplies too. So if you are interested in pattern making or knitting drop by!


If you've never operated a sewing machine before, ask some people at Noisebridge such as Rachel, Crutcher, Alex, ArielOr do some research onlineYou are very unlikely to damage the machines by simply messing around with them, but they are not completely self-explanatory and this page does assume a certain amount of prior general knowledge. A good time to get help is Wednesday evenings, when [[SCoW]] meets.
We will have supplies to knit, needles and yarnAlso fabric for DIYCome by to make an apron as a first project! Learn to use the machines too!


== The industrial straight stitch Juki sewing machine ==
Sewing...
This machine does only straight stitches, no zig-zag (and no button holes). It can go very fast. It has an automatic thread cutter which is triggered by pushing down on the treadle with your heel, the opposite from how you push to have it make stitches.  There's a set of buttons on a widget atop the machine which control automated backstitching.  If the top light is lit, the machine will do a backstitch when you start a seam.  If the bottom light is lit, it will do a backstitch prior to cutting the thread, when you push back on the treadle.  Push the associated button to toggle the backstitching.  If this isn't clear yet, take some scrap fabric and play around with it until it makes sense.  There's scrap fabric in the wheeled canvas bins under the table by the window.


Bobbins are kept in the drawer under the left side of the machine's table.  Also in that drawer are thread snips, replacement needles, and a little screwdriver to change the needle with.  Note that the needle faces to the left, instead of to the front, as on most home sewing machines.  If you replace a broken needle and put it in facing forwards, nothing will break but the machine will not form stitches.
We have several sewing machines at Noisebridge.


To wind a bobbin, place the empty bobbin on the horizontal spindle to the right of the machine body (near the hand wheel). Run a second thread through the upper holder, down to the tensioner at the back of the right side of the machine, in line with the spindle.  Thread the end through one of the holes in the bobbin side, from the inside to the outside.  Press the lever to push the spindle down in contact with the sewing machine beltWhile holding the thread end so it doesn't just whip out of the bobbin, press the treadle to run a couple of inches (if there were fabric in the machine).  Soon enough you can let go of the thread end as it will have been caught by windings on top of it.  If you are doing a lot of sewing, you can start a new bobbin before the current one is empty, and let it wind up as you sew.  When the bobbin is full, the lever will automatically snap out away from the belt and stop winding thread.
Juki single needle industrial machine which is working well! Fortunatly a person has dedicated time in care for this machine.  It is a happy machine!


The top speed of the machine can be adjusted using one of the knobs on a box under the table, next to the motorIt is the second knob downRight is faster, left is slowerFeel free to adjust this -- use a scrap piece of fabric to determine a good top speed for your skill level and project needs.
Juki M2500, five spool chain stitch with three thread overlockThis is for woven fabricsYou can ask for assistance and a tutorial anytimeA very good machine!


Full manual: [[Media:Juki-ddl-5550-6.pdf]]
A walking foot.


A 4 spool Bernina serger for knits. 


== The industrial Juki serger ==
A Pfaff single needle wit IDT.
This machine does three kinds of stitches: a three-thread overlock, a chainstitch/overlock combination, or a four-thread overlock.  Normally it is set up to do the three-thread overlock, which only requires one needle, and doesn't use the rear thread trace or the second upper thread trace.  This machine has a knife placed to cut the fabric as you sew, and it *is possible* to cut your finger badly on this knife if you are not careful.  The location of the knife is pointed out in bright orange nail polish on the machine.  BE CAREFUL.  This machine also can go extremely, sometimes startlingly, fast.


Thread tension is controlled by the knobs on the right front of the machine.  Mostly they're adjusted properly, and for most uses of serging the tension is not critical.  If the serged stitching is really wonky, though, try messing with the tension dials - be sure the thread is caught properly between the tension plates, as it occasionally gets into the springs instead.
A cast iron Westinghouse single needle.


DO NOT UNTHREAD THE SERGER.  If you want different colored thread, simply cut off the current threads near the cone spools, and tie on a new thread.  Then either pull the threads through from the needle area (this can be difficult as they are somewhat knotted and you'll have to pull one out through the guts of the machine), or serge for a few inches on some scrap until the new color is pulled through.  You may or may not find that the knot catches on the hole in the needle.  If it does, just cut it, rethread the needle, pull 6 or 8 inches of thread through, and keep serging for a bit.
A Brother home sewing machine.


If a thread breaks and forms a tangle, or breaks somewhere in the middle of the threading, you can find a map of how to rethread it on the inside of a little door that opens up just to the right of the knife.  It opens downwards and lets you get at the levers and such of the thread traces.  Each thread trace is drawn in a different color, however note that the tension dials are of mismatched colors, so follow the guide not the tension dial coloring.
New for the month of August we are purchasing new thread.


Full manual: [[Media:JukiMO240424142416.pdf]]
=='''PFAFF''' ==


Pfaff 2022.  This machine is in working order.  I purchased it from the original owner recently.  This machine has IDT. If you have any questions on using the machine you can text or call me @ 415-850-3704.  My name is Maria and I live in the Mission, close to Noisebridge.  I would be happy to show you how it works!  My email is lbarbas@mail.ccsf.edu.   


We are working hard to make the space a functional and beautiful space to work in.


== The portable Necchi ==
== 2015 Upgrade ==
This is the only one of our functional sewing machines that can make buttonholes.  It tends to snarl when run fast, but is usually OK when run at a slow or moderate speed.
As a spin off of the [[Maker Faire 2015|Noisebridge Booth for Maker Fair 2015 project]] the sewing area is going to be upgraded. Recently people have started maintaining and using the sewing area regularly again. The casework being built for Maker Faire 2015 will actually be designed for the sewing area so that after the show it may form the basis of the sewing area upgrade project.


[http://www.instructables.com/id/Noisebridge-Sewing-Machine/ Instructions for the smaller Necchi sewing machine.]
I have started collecting inspiration images that will be used to design the cabinets and new sewing area. This project is currently in the conceptual design phase, so if you have ideas please add them here. Not pictured are ideas for storage of donated materials and fabrics. I think there should also be some clothes rods for hanging up projects and materials. Maybe a trip to a fabric store(s) could help.
 
'''Wish List'''
 
If you are interested in donating supplies to Noisebridge Sewing and DIY area here a little help...
 
1. Professional Dress forms.
2. Thread and Fabric for DIY.
3. Silk Screens.
4. New Pattern Paper.
5. Professional Rulers for pattern making, french curves.
6. Fabric Rotary Cutting Board.
7. Oil for the JUKE machines.
8. snips.
 
note: some of us have allergies and asthma to mold and dust mites so we ask that the donated items be reasonably free from these allergens.  We love donations! 
 
We also have a donation metal box at Noisebridge for cash donations.
 
 
== '''Knitting''' ==
 
I am interested in knitting and have taught knitting. I will have knitting supplies for everyone.  I have been knitting for 25 years and have worked as a sample maker and consultant.  I have written patterns and someday would love to write a book on knitting.  I LOVE knitting and the practice of this has helped me in so many ways...come by to learn the practice of knitting as an art form or to relax!  Again you can text me for free a knitting consult at Noisebridge and my phone so we can meet up there.  Maria 415-850-3704.

Revision as of 19:08, 1 August 2015

Wednesday Night at Noisebridge

We will have an evening for DIY and sewing. We will have supplies too. So if you are interested in pattern making or knitting drop by!

We will have supplies to knit, needles and yarn. Also fabric for DIY. Come by to make an apron as a first project! Learn to use the machines too!

Sewing...

We have several sewing machines at Noisebridge.

Juki single needle industrial machine which is working well! Fortunatly a person has dedicated time in care for this machine. It is a happy machine!

Juki M2500, five spool chain stitch with three thread overlock. This is for woven fabrics. You can ask for assistance and a tutorial anytime. A very good machine!

A walking foot.

A 4 spool Bernina serger for knits.

A Pfaff single needle wit IDT.

A cast iron Westinghouse single needle.

A Brother home sewing machine.

New for the month of August we are purchasing new thread.

PFAFF

Pfaff 2022. This machine is in working order. I purchased it from the original owner recently. This machine has IDT. If you have any questions on using the machine you can text or call me @ 415-850-3704. My name is Maria and I live in the Mission, close to Noisebridge. I would be happy to show you how it works! My email is lbarbas@mail.ccsf.edu.

We are working hard to make the space a functional and beautiful space to work in.

2015 Upgrade

As a spin off of the Noisebridge Booth for Maker Fair 2015 project the sewing area is going to be upgraded. Recently people have started maintaining and using the sewing area regularly again. The casework being built for Maker Faire 2015 will actually be designed for the sewing area so that after the show it may form the basis of the sewing area upgrade project.

I have started collecting inspiration images that will be used to design the cabinets and new sewing area. This project is currently in the conceptual design phase, so if you have ideas please add them here. Not pictured are ideas for storage of donated materials and fabrics. I think there should also be some clothes rods for hanging up projects and materials. Maybe a trip to a fabric store(s) could help.

Wish List

If you are interested in donating supplies to Noisebridge Sewing and DIY area here a little help...

1. Professional Dress forms. 2. Thread and Fabric for DIY. 3. Silk Screens. 4. New Pattern Paper. 5. Professional Rulers for pattern making, french curves. 6. Fabric Rotary Cutting Board. 7. Oil for the JUKE machines. 8. snips.

note: some of us have allergies and asthma to mold and dust mites so we ask that the donated items be reasonably free from these allergens. We love donations!

We also have a donation metal box at Noisebridge for cash donations.


Knitting

I am interested in knitting and have taught knitting. I will have knitting supplies for everyone. I have been knitting for 25 years and have worked as a sample maker and consultant. I have written patterns and someday would love to write a book on knitting. I LOVE knitting and the practice of this has helped me in so many ways...come by to learn the practice of knitting as an art form or to relax! Again you can text me for free a knitting consult at Noisebridge and my phone so we can meet up there. Maria 415-850-3704.