Resources/Shop

From Noisebridge
< Resources(Difference between revisions)
Jump to: navigation, search
(Tools)
(2 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
==Tools==
 
==Tools==
  
 +
* [[Table Saw]] (Black & Decker BT2500)
 
* [[Lathe]] (7"x12" Cummins)
 
* [[Lathe]] (7"x12" Cummins)
 
** Check http://www.mini-lathe.com/ for great info
 
** Check http://www.mini-lathe.com/ for great info
Line 10: Line 11:
 
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
 
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
 
* [[Bench grinder]] (Ryobi 6")
 
* [[Bench grinder]] (Ryobi 6")
 +
* [[Disk sander]] (Delta 31-120 12")
 
* [[Drill press]] (Ryobi RDP1850)
 
* [[Drill press]] (Ryobi RDP1850)
 
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
 
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
Line 19: Line 21:
  
 
==Other Noisebridge Tools==
 
==Other Noisebridge Tools==
* [[Laser cutter]]
+
* [[Lasercutter | Laser cutter]]
 
* [[3D printers]]
 
* [[3D printers]]
  

Revision as of 18:26, 9 November 2013

The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.

Lathe, drill press and others

Tools

Other Noisebridge Tools

Safety

A note regarding cutting metal in stationary tools:

The shavings that come off the metal piece being cut are HOT!

In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!

When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.

Personal tools