Resources/Pony

From Noisebridge
< Resources(Difference between revisions)
Jump to: navigation, search
(Specs)
(45 intermediate revisions by 17 users not shown)
Line 1: Line 1:
pony.noise is a headless Linux box at 83c.
+
pony.noise is a headless Linux box at Noisebridge.
  
=== Specs ===
+
 
 +
== Refreshing pony.noise/juke ==
 +
 
 +
To refresh jukebox once you've added new stuff at /data/d2/music/, either:
 +
 
 +
* go to pony.noise/juke, config, login, config, 'update db' (bottom right of popup), or
 +
* log in to ssh://juke:noisebridge@horsy.noise, run ncmpc, hit control-u
 +
 
 +
... and then wait. It take a while to update the database.
 +
 
 +
== Access ==
 +
* From the main Noisebridge [[Network|network]], the IP address is 172.30.0.30, and DNS has it at <tt>pony.noise</tt>.
 +
* From the Internet or the '''noisebridge-dsl''' wifi, a NAT port is forwarded from <tt>pony.noisebridge.net</tt>.
 +
 
 +
=== SSH information ===
 +
 
 +
RSA key fingerprint is 9d:af:f4:94:70:65:ab:b2:af:a1:ad:03:2b:36:e6:43.
 +
 
 +
With the following stanza in <tt>~/.ssh/config</tt>, you can <tt>ssh pony</tt> from outside, and <tt>ssh pony.local</tt> from inside.
 +
<pre>
 +
Host pony | pony.local
 +
  Hostname pony.noisebridge.net
 +
  ForwardAgent no
 +
  ForwardX11 no
 +
</pre>
 +
 
 +
== Accounts ==
 +
 
 +
If you want an account:
 +
 
 +
1) Create an account on this wiki.
 +
 
 +
2) Log in to it and go to your User page. You can get to your User page from the link with your new account name at the top of any wiki page.
 +
 
 +
3) Add whatever info to your User page that you'd like to have there.
 +
 
 +
4) Add public PGP key information to your User page (described below)
 +
 
 +
To add a SSH Key and an Adduser stanza to your User: page on the wiki; see [[User:Adi]] or [[User:Rubin110]] or [[User:Miloh]] for examples.  Then introduce yourself on the [[https://www.noisebridge.net/mailman/listinfo/rack rack]] mailing list for an account.  Any Noisebridge member who agrees to be excellent to each other is welcome to an account.  All users get <tt>sudo apt-get</tt> access; additional administration duties will be shared as necessary (asking nice works better then threatening to root the box).
 +
 
 +
[[Generating_keys|Here is a tutorial on generating keys for and configuring ssh]]
 +
 
 +
Requests to change a user's shell after the account has been created will require a personal favor or a [http://www.dailymotion.com/video/x5r0je_weird-al-on-family-double-dare-part_fun Double Dare].  (Or you can simply use <tt>chsh</tt>.)
 +
 
 +
Full sudoers (updated 20100222):
 +
 
 +
* [[User:adi]]
 +
* [[User:rubin110]]
 +
* [[User:ioerror]]
 +
* [[User:jof]]
 +
* [[User:dr_jesus]]
 +
* [[User:leif]]
 +
* [[User:Shkoo]]
 +
* [[User:aestetix]]
 +
* [[User:zaius]]
 +
* [[User:thatha]]
 +
* [[User:micah]]
 +
* [[User:Miloh]]
 +
* [[User:mct]]
 +
* [[User:Malaclyps]]
 +
* [[User:lizzard]]
 +
* [[User:yesac]]
 +
* [[User:heatxsink]]
 +
* Jack Perkins
 +
* Benny Baumann
 +
* Jeffrey Malone
 +
 
 +
== Backups ==
 +
 
 +
There Are No Backups.
 +
 
 +
== Specs ==
 +
 
 +
(Runs in a VM on [[Stallion]], I believe)
 
* 2GB RAM
 
* 2GB RAM
 
* 3-core 64-bit AMD CPU at 2.1 GHz
 
* 3-core 64-bit AMD CPU at 2.1 GHz
 
* 750GB system drive
 
* 750GB system drive
 
* 2.5 TB data drives in eSATA chassis (/d1, /d2, /d3)
 
* 2.5 TB data drives in eSATA chassis (/d1, /d2, /d3)
* Debian Etch (4.0 rc6) 32-bit install
+
* Debian Lenny (5.0 stable) 32-bit install
* 172.30.0.30
+
  
== Accounts ==
+
* Can we get a 64-bit kernel at least? ([http://packages.debian.org/search?keywords=linux-image-amd64 pkg:linux-image-amd64]) -Shawn
  
Contact [[User:Rubin110|rubin110]] or [[User:Adi|adi]] for an accountAny Noisebridge member who agrees to be excellent to each other is welcome to an accountAll users get <tt>sudo apt-get</tt> access; additional administration duties will be shared as necessary.
+
=== df -h ===
 +
<pre>
 +
Filesystem            Size  Used Avail Use% Mounted on
 +
/dev/vda5            3.0G 1.5G 1.4G  54% /
 +
tmpfs                990M    0  990M  0% /lib/init/rw
 +
udev                  985M  132K  985M  1% /dev
 +
tmpfs                990M    0  990M  0% /dev/shm
 +
/dev/vda1            194M  33M  152M  18% /boot
 +
/dev/vda9            2.0G  69M  1.9G  4% /tmp
 +
/dev/vda6            6.9G  5.6G  1.1G  85% /usr
 +
/dev/vda7            6.9G  1.4G  5.2G  21% /var
 +
/dev/vda8            5.0G  1.9G  2.9G  40% /var/log
 +
/dev/mapper/pony--data-home
 +
                      504G  183G  296G  39% /home
 +
/dev/mapper/pony--data-d
 +
                      1.8T  1.5T  223G  87% /data
 +
/dev/mapper/pony--data-www
 +
                      9.9G  222M  9.2G  3% /var/www
 +
</pre>
  
== Backups ==
+
= O&M =
  
There Are No Backups.
+
Restart Procedure:
 +
 
 +
Use the IP PDU documented on the [[Network]] page.
  
== dmesg ==
+
[[Category:Servers]] [[Category:Physical infrastructure]]
[   0.000000] Initializing cgroup subsys cpuset
+
[   0.000000] Initializing cgroup subsys cpu
+
[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
+
[    0.000000] BIOS-provided physical RAM map:
+
[    0.000000] BIOS-e820: 0000000000000000 - 0000000000099400 (usable)
+
[   0.000000]  BIOS-e820: 0000000000099400 - 00000000000a0000 (reserved)
+
[   0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
+
[    0.000000] BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
+
[    0.000000] BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
+
[    0.000000]  BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
+
[    0.000000]  BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
+
[    0.000000]  BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
+
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
+
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
+
[    0.000000] 894MB HIGHMEM available.
+
[    0.000000] 896MB LOWMEM available.
+
[    0.000000] found SMP MP-table at [c00f56f0] 000f56f0
+
[    0.000000] Entering add_active_range(0, 0, 458464) 0 entries of 256 used
+
[    0.000000] Zone PFN ranges:
+
[    0.000000]  DMA            0 ->    4096
+
[    0.000000]  Normal      4096 ->  229376
+
[    0.000000]  HighMem    229376 ->  458464
+
[    0.000000] Movable zone start PFN for each node
+
[    0.000000] early_node_map[1] active PFN ranges
+
[    0.000000]    0:        0 ->  458464
+
[    0.000000] On node 0 totalpages: 458464
+
[    0.000000]  DMA zone: 32 pages used for memmap
+
[    0.000000]  DMA zone: 0 pages reserved
+
[    0.000000]  DMA zone: 4064 pages, LIFO batch:0
+
[    0.000000]  Normal zone: 1760 pages used for memmap
+
[    0.000000]  Normal zone: 223520 pages, LIFO batch:31
+
[    0.000000]  HighMem zone: 1790 pages used for memmap
+
[    0.000000]  HighMem zone: 227298 pages, LIFO batch:31
+
[    0.000000]  Movable zone: 0 pages used for memmap
+
[    0.000000] DMI 2.5 present.
+
[    0.000000] ACPI: RSDP 000F7280, 0024 (r2 Nvidia)
+
[    0.000000] ACPI: XSDT 6FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
+
[    0.000000] ACPI: FACP 6FEED400, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
+
[    0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080321]
+
[    0.000000] ACPI: DSDT 6FEE3280, A113 (r1 NVIDIA ASUSACPI    1000 MSFT  3000000)
+
[    0.000000] ACPI: FACS 6FEE0A80, 0040
+
[    0.000000] ACPI: SSDT 6FEED640, 0616 (r1 PTLTD  POWERNOW        1  LTP        1)
+
[    0.000000] ACPI: HPET 6FEEDCC0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD      98)
+
[    0.000000] ACPI: MCFG 6FEEDD40, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
+
[    0.000000] ACPI: APIC 6FEED540, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
+
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
+
[    0.000000] ACPI: Local APIC address 0xfee00000
+
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
+
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
+
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
+
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
+
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
+
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
+
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
+
[    0.000000] ACPI: IRQ0 used by override.
+
[    0.000000] ACPI: IRQ2 used by override.
+
[    0.000000] ACPI: IRQ9 used by override.
+
[    0.000000] ACPI: IRQ14 used by override.
+
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
+
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
+
[    0.000000] Using ACPI (MADT) for SMP configuration information
+
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
+
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
+
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
+
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
+
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
+
[    0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
+
[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
+
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 4
+
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454882
+
[    0.000000] Kernel command line: root=/dev/sda5 ro
+
[    0.000000] mapped APIC to ffffb000 (fee00000)
+
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
+
[    0.000000] Enabling fast FPU save and restore... done.
+
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
+
[    0.000000] Initializing CPU#0
+
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
+
[    0.000000] Extended CMOS year: 2000
+
[    0.000000] Detected 2099.997 MHz processor.
+
[    0.004000] spurious 8259A interrupt: IRQ7.
+
[    0.004000] Console: colour VGA+ 80x25
+
[    0.004000] console [tty0] enabled
+
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+
[    0.004000] Memory: 1807948k/1833856k available (1769k kernel code, 24600k reserved, 752k data, 244k init, 916352k highmem)
+
[    0.004000] virtual kernel memory layout:
+
[    0.004000]    fixmap  : 0xfff4c000 - 0xfffff000  ( 716 kB)
+
[    0.004000]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
+
[    0.004000]    vmalloc : 0xf8800000 - 0xff7fe000  ( 111 MB)
+
[    0.004000]    lowmem  : 0xc0000000 - 0xf8000000  ( 896 MB)
+
[    0.004000]      .init : 0xc037f000 - 0xc03bc000  ( 244 kB)
+
[    0.004000]      .data : 0xc02ba4ab - 0xc0376620  ( 752 kB)
+
[    0.004000]      .text : 0xc0100000 - 0xc02ba4ab  (1769 kB)
+
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
+
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
+
[    0.004000] hpet clockevent registered
+
[    0.083901] Calibrating delay using timer specific routine.. 4204.51 BogoMIPS (lpj=8409038)
+
[    0.084005] Security Framework initialized
+
[    0.084005] SELinux:  Disabled at boot.
+
[    0.084005] Capability LSM initialized
+
[    0.084005] Mount-cache hash table entries: 512
+
[    0.084005] Initializing cgroup subsys ns
+
[    0.084005] Initializing cgroup subsys cpuacct
+
[    0.084005] Initializing cgroup subsys devices
+
[    0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
+
[    0.084005] CPU: L2 Cache: 512K (64 bytes/line)
+
[    0.084005] CPU 0(3) -> Core 0
+
[    0.084005] Intel machine check architecture supported.
+
[    0.084005] Intel machine check reporting enabled on CPU#0.
+
[    0.084005] Checking 'hlt' instruction... OK.
+
[    0.100006] ACPI: Core revision 20080321
+
[    0.116007] ENABLING IO-APIC IRQs
+
[    0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
+
[    0.155739] CPU0: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
+
[    0.155975] Booting processor 1/1 ip 6000
+
[    0.164010] Initializing CPU#1
+
[    0.164010] Calibrating delay using timer specific routine.. 4200.66 BogoMIPS (lpj=8401324)
+
[    0.164010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
+
[    0.164010] CPU: L2 Cache: 512K (64 bytes/line)
+
[    0.164010] CPU 1(3) -> Core 1
+
[    0.164010] AMD C1E detected late.  Force timer broadcast.
+
[    0.164010] Intel machine check architecture supported.
+
[    0.164010] Intel machine check reporting enabled on CPU#1.
+
[    0.244015] CPU1: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
+
[    0.244015] Booting processor 2/2 ip 6000
+
[    0.252015] Initializing CPU#2
+
[    0.252015] Calibrating delay using timer specific routine.. 4200.51 BogoMIPS (lpj=8401024)
+
[    0.252015] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
+
[    0.252015] CPU: L2 Cache: 512K (64 bytes/line)
+
[    0.252015] CPU 2(3) -> Core 2
+
[    0.252015] AMD C1E detected late.  Force timer broadcast.
+
[    0.252015] Intel machine check architecture supported.
+
[    0.252015] Intel machine check reporting enabled on CPU#2.
+
[    0.335194] CPU2: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
+
[    0.335750] Brought up 3 CPUs
+
[    0.335802] Total of 3 processors activated (12605.69 BogoMIPS).
+
[    0.335891] CPU0 attaching sched-domain:
+
[    0.335893]  domain 0: span 0-2
+
[    0.335895]  groups: 0 1 2
+
[    0.335899] CPU1 attaching sched-domain:
+
[    0.335901]  domain 0: span 0-2
+
[    0.335903]  groups: 1 2 0
+
[    0.335906] CPU2 attaching sched-domain:
+
[    0.335908]  domain 0: span 0-2
+
[    0.335909]  groups: 2 0 1
+
[    0.336021] net_namespace: 660 bytes
+
[    0.336021] Booting paravirtualized kernel on bare hardware
+
[    0.336021] NET: Registered protocol family 16
+
[    0.336021] ACPI: bus type pci registered
+
[    0.336021] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
+
[    0.336021] PCI: MCFG area at f0000000 reserved in E820
+
[    0.336021] PCI: Using MMCONFIG for extended config space
+
[    0.336021] PCI: Using configuration type 1 for base access
+
[    0.336021] Setting up standard PCI resources
+
[    0.347224] ACPI: EC: Look up EC in DSDT
+
[    0.364057] ACPI: Interpreter enabled
+
[    0.364057] ACPI: (supports S0 S1 S3 S4 S5)
+
[    0.364273] ACPI: Using IOAPIC for interrupt routing
+
[    0.395073] ACPI: PCI Root Bridge [PCI0] (0000:00)
+
[    0.396630] PCI: Transparent bridge - 0000:00:08.0
+
[    0.397185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
+
[    0.397765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
+
[    0.626603] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
+
[    0.627200] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.627860] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.628520] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
+
[    0.629104] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.629760] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.630418] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.631071] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.631727] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15)
+
[    0.632318] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.632972] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15)
+
[    0.633557] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15)
+
[    0.634140] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.634794] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.635450] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.636107] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.636765] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.637425] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.638077] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.638733] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.639387] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15)
+
[    0.639971] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.640652] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.643302] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.643956] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.644618] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.645277] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.645933] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.646586] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.647239] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.647896] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.648563] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.649219] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.649881] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.650537] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.651191] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.651850] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.652517] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
+
[    0.653101] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.653757] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.654410] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.655063] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.655724] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
+
[    0.656322] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.656977] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
+
[    0.657561] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.658215] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
+
[    0.658871] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
+
[    0.659493] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
+
[    0.659978] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
+
[    0.660498] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
+
[    0.661012] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
+
[    0.661491] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
+
[    0.662003] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
+
[    0.662515] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
+
[    0.663024] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
+
[    0.663534] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
+
[    0.664020] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
+
[    0.664541] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
+
[    0.665021] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
+
[    0.665504] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
+
[    0.666016] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
+
[    0.666526] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
+
[    0.667038] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
+
[    0.667543] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
+
[    0.668055] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
+
[    0.668591] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
+
[    0.669101] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
+
[    0.669613] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
+
[    0.670096] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
+
[    0.670609] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
+
[    0.671122] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
+
[    0.671632] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
+
[    0.672141] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
+
[    0.672657] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
+
[    0.673169] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
+
[    0.673683] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
+
[    0.674193] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
+
[    0.674702] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
+
[    0.675215] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
+
[    0.675731] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
+
[    0.676244] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
+
[    0.676762] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
+
[    0.677271] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
+
[    0.677783] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
+
[    0.678347] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
+
[    0.678943] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
+
[    0.679533] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
+
[    0.680126] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
+
[    0.680730] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
+
[    0.681296] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
+
[    0.681858] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
+
[    0.682457] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
+
[    0.683056] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
+
[    0.683652] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
+
[    0.684245] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
+
[    0.688283] Linux Plug and Play Support v0.97 (c) Adam Belay
+
[    0.688283] pnp: PnP ACPI init
+
[    0.688283] ACPI: bus type pnp registered
+
[    0.698545] pnp: PnP ACPI: found 11 devices
+
[    0.698545] ACPI: ACPI bus type pnp unregistered
+
[    0.698600] PnPBIOS: Disabled by ACPI PNP
+
[    0.702545] PCI: Using ACPI for IRQ routing
+
[    0.710496] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
+
[    0.710545] hpet0: 3 32-bit timers, 25000000 Hz
+
[    0.710545] ACPI: RTC can wake from S4
+
[    0.713159] Clockevents: could not switch to one-shot mode: lapic is not functional.
+
[    0.713264] Could not switch to high resolution mode on CPU 0
+
[    0.713355] system 00:01: ioport range 0x1000-0x107f has been reserved
+
[    0.713416] system 00:01: ioport range 0x1080-0x10ff has been reserved
+
[    0.713476] system 00:01: ioport range 0x1400-0x147f has been reserved
+
[    0.713535] system 00:01: ioport range 0x1480-0x14ff has been reserved
+
[    0.713590] system 00:01: ioport range 0x1800-0x187f has been reserved
+
[    0.713650] system 00:01: ioport range 0x1880-0x18ff has been reserved
+
[    0.713712] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
+
[    0.713779] system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved
+
[    0.713857] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
+
[    0.713909] system 00:02: ioport range 0x800-0x87f has been reserved
+
[    0.713962] system 00:02: ioport range 0x290-0x297 has been reserved
+
[    0.714035] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
+
[    0.714113] system 00:0a: iomem range 0xdf000-0xdffff has been reserved
+
[    0.714173] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
+
[    0.714233] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
+
[    0.714286] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
+
[    0.714352] system 00:0a: iomem range 0xfeff0000-0xfeff00ff could not be reserved
+
[    0.714419] system 00:0a: iomem range 0x6fee0000-0x6fefffff could not be reserved
+
[    0.714498] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0x100000-0x6fedffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0x6fff0000-0x7ffeffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0xfff80000-0xfff80fff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0xfff90000-0xfffbffff could not be reserved
+
[    0.714551] system 00:0a: iomem range 0xfffed000-0xfffeffff could not be reserved
+
[    0.722056] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
+
[    0.724586] Could not switch to high resolution mode on CPU 1
+
[    0.722056]  lapic is not functional.
+
[    0.722056] Could not switch to high resolution mode on CPU 2
+
[    0.752581] PCI: Bridge: 0000:00:08.0
+
[    0.752637]  IO window: c000-cfff
+
[    0.752693]  MEM window: 0xfde00000-0xfdefffff
+
[    0.752743]  PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
+
[    0.752804] PCI: Bridge: 0000:00:0b.0
+
[    0.752852]  IO window: b000-bfff
+
[    0.752906]  MEM window: 0xfb000000-0xfcffffff
+
[    0.752955]  PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
+
[    0.753014] PCI: Bridge: 0000:00:10.0
+
[    0.753064]  IO window: a000-afff
+
[    0.753123]  MEM window: 0xfdc00000-0xfdcfffff
+
[    0.753180]  PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
+
[    0.753246] PCI: Bridge: 0000:00:12.0
+
[    0.753300]  IO window: 9000-9fff
+
[    0.753354]  MEM window: 0xfda00000-0xfdafffff
+
[    0.753412]  PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
+
[    0.753476] PCI: Bridge: 0000:00:13.0
+
[    0.753530]  IO window: 8000-8fff
+
[    0.753589]  MEM window: 0xfd800000-0xfd8fffff
+
[    0.753642]  PREFETCH window: 0x00000000fd700000-0x00000000fd7fffff
+
[    0.753714] PCI: Bridge: 0000:00:14.0
+
[    0.753763]  IO window: 7000-7fff
+
[    0.753822]  MEM window: 0xfd600000-0xfd6fffff
+
[    0.753880]  PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff
+
[    0.753959] PCI: Setting latency timer of device 0000:00:08.0 to 64
+
[    0.753970] PCI: Setting latency timer of device 0000:00:0b.0 to 64
+
[    0.754043] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
+
[    0.756582] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AE0A] -> GSI 16 (level, low) -> IRQ 16
+
[    0.756724] PCI: Setting latency timer of device 0000:00:10.0 to 64
+
[    0.757203] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
+
[    0.757254] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [AE2A] -> GSI 16 (level, low) -> IRQ 16
+
[    0.757396] PCI: Setting latency timer of device 0000:00:12.0 to 64
+
[    0.757873] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
+
[    0.757924] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [AE3A] -> GSI 16 (level, low) -> IRQ 16
+
[    0.758054] PCI: Setting latency timer of device 0000:00:13.0 to 64
+
[    0.758529] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
+
[    0.758580] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [AE4A] -> GSI 16 (level, low) -> IRQ 16
+
[    0.758715] PCI: Setting latency timer of device 0000:00:14.0 to 64
+
[    0.758772] NET: Registered protocol family 2
+
[    0.768902] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
+
[    0.769216] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
+
[    0.769791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
+
[    0.770093] TCP: Hash tables configured (established 131072 bind 65536)
+
[    0.770153] TCP reno registered
+
[    0.773008] NET: Registered protocol family 1
+
[    0.773158] checking if image is initramfs... it is
+
[    1.194973] Freeing initrd memory: 6031k freed
+
[    1.198969] audit: initializing netlink socket (disabled)
+
[    1.198969] type=2000 audit(1232949417.159:1): initialized
+
[    1.198969] highmem bounce pool size: 64 pages
+
[    1.198969] Total HugeTLB memory allocated, 0
+
[    1.198969] VFS: Disk quotas dquot_6.5.1
+
[    1.198969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
+
[    1.198969] msgmni has been set to 1754
+
[    1.198969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
+
[    1.198969] io scheduler noop registered
+
[    1.198969] io scheduler anticipatory registered
+
[    1.198969] io scheduler deadline registered
+
[    1.198969] io scheduler cfq registered (default)
+
[    1.267206] pci 0000:00:08.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:09.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:0a.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:0b.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:10.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:12.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:13.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:00:14.0: Enabling HT MSI Mapping
+
[    1.267206] pci 0000:02:00.0: Boot video device
+
[    1.267206] PCI: Setting latency timer of device 0000:00:10.0 to 64
+
[    1.267206] assign_interrupt_mode Found MSI capability
+
[    1.267206] Allocate Port Service[0000:00:10.0:pcie00]
+
[    1.267206] PCI: Setting latency timer of device 0000:00:12.0 to 64
+
[    1.267206] assign_interrupt_mode Found MSI capability
+
[    1.267206] Allocate Port Service[0000:00:12.0:pcie00]
+
[    1.267206] PCI: Setting latency timer of device 0000:00:13.0 to 64
+
[    1.267206] assign_interrupt_mode Found MSI capability
+
[    1.267206] Allocate Port Service[0000:00:13.0:pcie00]
+
[    1.267206] PCI: Setting latency timer of device 0000:00:14.0 to 64
+
[    1.267206] assign_interrupt_mode Found MSI capability
+
[    1.267206] Allocate Port Service[0000:00:14.0:pcie00]
+
[    1.270969] isapnp: Scanning for PnP cards...
+
[    1.622967] isapnp: No Plug & Play device found
+
[    1.622967] hpet_resources: 0xfeff0000 is busy
+
[    1.622967] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
+
[    1.626964] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
+
[    1.626964] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
+
[    1.626965] brd: module loaded
+
[    1.626965] PNP: No PS/2 controller found. Probing ports directly.
+
[    1.626965] serio: i8042 KBD port at 0x60,0x64 irq 1
+
[    1.626965] serio: i8042 AUX port at 0x60,0x64 irq 12
+
[    1.626965] mice: PS/2 mouse device common for all mice
+
[    1.626965] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
+
[    1.626965] rtc0: alarms up to one year, y3k
+
[    1.626965] cpuidle: using governor ladder
+
[    1.626965] cpuidle: using governor menu
+
[    1.626965] No iBFT detected.
+
[    1.626965] TCP cubic registered
+
[    1.626965] NET: Registered protocol family 17
+
[    1.630964] Using IPI No-Shortcut mode
+
[    1.630964] registered taskstats version 1
+
[    1.630964] rtc_cmos 00:05: setting system clock to 2009-01-26 05:56:58 UTC (1232949418)
+
[    1.630964] Freeing unused kernel memory: 244k freed
+
[    1.709799] ACPI: PNP0C0B:00 is registered as cooling_device0
+
[    1.709875] ACPI: Fan [FAN] (on)
+
[    1.714352] ACPI: ACPI0007:00 is registered as cooling_device1
+
[    1.714457] ACPI: ACPI0007:01 is registered as cooling_device2
+
[    1.714457] ACPI: ACPI0007:02 is registered as cooling_device3
+
[    1.716544] ACPI: Expecting a [Reference] package element, found type 0
+
[    1.717138] ACPI: LNXTHERM:01 is registered as thermal_zone0
+
[    1.717513] ACPI: Thermal Zone [THRM] (40 C)
+
[    1.910812] usbcore: registered new interface driver usbfs
+
[    1.910886] usbcore: registered new interface driver hub
+
[    1.910968] usbcore: registered new device driver usb
+
[    1.911844] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
+
[    1.912360] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
+
[    1.912418] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
+
[    1.912551] PCI: Setting latency timer of device 0000:00:02.0 to 64
+
[    1.912554] ohci_hcd 0000:00:02.0: OHCI Host Controller
+
[    1.912740] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
+
[    1.912826] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
+
[    1.924398] No dock devices found.
+
[    1.929960] SCSI subsystem initialized
+
[    1.937413] libata version 3.00 loaded.
+
[    1.952952] natsemi dp8381x driver, version 2.1, Sept 11, 2006
+
[    1.952954]  originally by Donald Becker <becker@scyld.com>
+
[    1.952956]  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
+
[    1.968726] usb usb1: configuration #1 chosen from 1 choice
+
[    1.968803] hub 1-0:1.0: USB hub found
+
[    1.968856] hub 1-0:1.0: 6 ports detected
+
[    2.071277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
+
[    2.071336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+
[    2.071410] usb usb1: Product: OHCI Host Controller
+
[    2.071467] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
+
[    2.071525] usb usb1: SerialNumber: 0000:00:02.0
+
[    2.074221] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
+
[    2.074285] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AU1B] -> GSI 22 (level, low) -> IRQ 22
+
[    2.074434] PCI: Setting latency timer of device 0000:00:04.0 to 64
+
[    2.074437] ohci_hcd 0000:00:04.0: OHCI Host Controller
+
[    2.074512] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
+
[    2.074600] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000
+
[    2.131077] usb usb2: configuration #1 chosen from 1 choice
+
[    2.131150] hub 2-0:1.0: USB hub found
+
[    2.131150] hub 2-0:1.0: 6 ports detected
+
[    2.232558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+
[    2.232617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+
[    2.232691] usb usb2: Product: OHCI Host Controller
+
[    2.232747] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
+
[    2.232805] usb usb2: SerialNumber: 0000:00:04.0
+
[    2.235073] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
+
[    2.235073] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 21 (level, low) -> IRQ 21
+
[    2.235073] PCI: Setting latency timer of device 0000:00:02.1 to 64
+
[    2.235073] ehci_hcd 0000:00:02.1: EHCI Host Controller
+
[    2.235073] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
+
[    2.235073] ehci_hcd 0000:00:02.1: debug port 1
+
[    2.235073] PCI: cache line size of 64 is not supported by device 0000:00:02.1
+
[    2.235073] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
+
[    2.247082] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+
[    2.247211] usb usb3: configuration #1 chosen from 1 choice
+
[    2.247291] hub 3-0:1.0: USB hub found
+
[    2.251072] hub 3-0:1.0: 6 ports detected
+
[    2.355144] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
+
[    2.355203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+
[    2.355269] usb usb3: Product: EHCI Host Controller
+
[    2.355318] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
+
[    2.359072] usb usb3: SerialNumber: 0000:00:02.1
+
[    2.359072] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
+
[    2.359072] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AU2B] -> GSI 20 (level, low) -> IRQ 20
+
[    2.359072] PCI: Setting latency timer of device 0000:00:04.1 to 64
+
[    2.359072] ehci_hcd 0000:00:04.1: EHCI Host Controller
+
[    2.359072] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
+
[    2.359072] ehci_hcd 0000:00:04.1: debug port 1
+
[    2.359072] PCI: cache line size of 64 is not supported by device 0000:00:04.1
+
[    2.359072] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
+
[    2.371783] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+
[    2.371900] usb usb4: configuration #1 chosen from 1 choice
+
[    2.371975] hub 4-0:1.0: USB hub found
+
[    2.372026] hub 4-0:1.0: 6 ports detected
+
[    2.479838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
+
[    2.479897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+
[    2.479963] usb usb4: Product: EHCI Host Controller
+
[    2.480022] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
+
[    2.483772] usb usb4: SerialNumber: 0000:00:04.1
+
[    2.483947] ahci 0000:00:09.0: version 3.0
+
[    2.483947] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
+
[    2.483947] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
+
[    3.485289] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
+
[    3.485364] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
+
[    3.485418] PCI: Setting latency timer of device 0000:00:09.0 to 64
+
[    3.486188] scsi0 : ahci
+
[    3.486856] scsi1 : ahci
+
[    3.487480] scsi2 : ahci
+
[    3.487941] scsi3 : ahci
+
[    3.487941] scsi4 : ahci
+
[    3.487941] scsi5 : ahci
+
[    3.487941] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 219
+
[    3.487941] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 219
+
[    3.487941] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 219
+
[    3.487941] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 219
+
[    3.487941] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 219
+
[    3.487941] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 219
+
[    3.975949] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[    3.979938] ata1.00: ATA-8: ST3750330AS, SD15, max UDMA/133
+
[    3.979938] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
+
[    3.983845] ata1.00: configured for UDMA/133
+
[    4.303949] ata2: SATA link down (SStatus 0 SControl 300)
+
[    4.627942] ata3: SATA link down (SStatus 0 SControl 300)
+
[    4.951951] ata4: SATA link down (SStatus 0 SControl 300)
+
[    5.275944] ata5: SATA link down (SStatus 0 SControl 300)
+
[    5.599945] ata6: SATA link down (SStatus 0 SControl 300)
+
[    5.603928] scsi 0:0:0:0: Direct-Access    ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
+
[    5.603933] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
+
[    5.603933] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
+
[    5.603933] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
+
[    5.603933] PCI: Setting latency timer of device 0000:00:0a.0 to 64
+
[    6.127927] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:22:15:f3:18:1d
+
[    6.127927] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
+
[    6.131699] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
+
[    6.131699] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
+
[    6.135699] natsemi eth1: NatSemi DP8381[56] at 0xfdeff000 (0000:01:08.0), 00:09:5b:8f:32:c9, IRQ 16, port TP.
+
[    6.135699] sata_sil24 0000:06:00.0: version 1.1
+
[    6.135699] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [AE4A] -> GSI 16 (level, low) -> IRQ 16
+
[    6.135699] PCI: Setting latency timer of device 0000:06:00.0 to 64
+
[    6.135699] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
+
[    6.135699] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
+
[    6.138040] scsi6 : sata_sil24
+
[    6.138150] scsi7 : sata_sil24
+
[    6.138221] ata7: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6f8000 irq 16
+
[    6.138294] ata8: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6fa000 irq 16
+
[    6.187223] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fdefe000-fdefe7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
+
[    6.195429] Uniform Multi-Platform E-IDE driver
+
[    6.195429] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+
[    6.210743] Driver 'sd' needs updating - please use bus_type methods
+
[    6.210880] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
+
[    6.210955] sd 0:0:0:0: [sda] Write Protect is off
+
[    6.211005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+
[    6.211020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[    6.211129] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
+
[    6.211202] sd 0:0:0:0: [sda] Write Protect is off
+
[    6.211252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+
[    6.211266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[    6.211336]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
+
[    6.334962] sd 0:0:0:0: [sda] Attached SCSI disk
+
[    7.472310] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00017a4bb2]
+
[    8.344169] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
+
[    8.348141] ata7.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
+
[    8.348141] ata7.00: hard resetting link
+
[    8.672137] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
+
[    8.672137] ata7.01: hard resetting link
+
[    8.996134] ata7.01: SATA link down (SStatus 0 SControl 320)
+
[    8.996134] ata7.02: hard resetting link
+
[    9.320131] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[    9.320131] ata7.03: hard resetting link
+
[    9.644126] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
+
[    9.644126] ata7.04: hard resetting link
+
[    9.968124] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[    9.968124] ata7.05: hard resetting link
+
[  10.292119] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
+
[  10.292119] ata7.06: hard resetting link
+
[  10.616116] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
+
[  10.616116] ata7.00: ATA-8: ST3750330AS, SD15, max UDMA/133
+
[  10.616116] ata7.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
+
[  10.620116] ata7.00: configured for UDMA/100
+
[  10.624118] ata7.02: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
+
[  10.624118] ata7.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
+
[  10.624118] ata7.02: configured for UDMA/100
+
[  10.628115] ata7.03: ATA-6: ST380013AS, 3.05, max UDMA/133
+
[  10.628115] ata7.03: 156301488 sectors, multi 0: LBA48
+
[  10.632116] ata7.03: configured for UDMA/100
+
[  10.744124] ata7.04: failed to IDENTIFY (I/O error, err_mask=0x11)
+
[  10.744182] ata7.15: hard resetting link
+
[  10.744235] ata7: controller in dubious state, performing PORT_RST
+
[  12.976120] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
+
[  12.980092] ata7.00: hard resetting link
+
[  13.304091] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
+
[  13.304091] ata7.01: hard resetting link
+
[  13.628086] ata7.01: SATA link down (SStatus 0 SControl 320)
+
[  13.628086] ata7.02: hard resetting link
+
[  13.952085] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[  13.952085] ata7.03: hard resetting link
+
[  14.276081] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
+
[  14.276081] ata7.04: hard resetting link
+
[  14.600077] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[  14.600077] ata7.05: hard resetting link
+
[  14.924073] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
+
[  14.924073] ata7.06: hard resetting link
+
[  15.248069] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
+
[  15.252070] ata7.00: configured for UDMA/100
+
[  15.263834] ata7.02: configured for UDMA/100
+
[  15.267972] ata7.03: configured for UDMA/100
+
[  15.384075] ata7.04: failed to IDENTIFY (I/O error, err_mask=0x11)
+
[  15.384127] ata7.15: hard resetting link
+
[  15.384175] ata7: controller in dubious state, performing PORT_RST
+
[  17.616075] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
+
[  17.620046] ata7.00: hard resetting link
+
[  17.944043] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
+
[  17.944043] ata7.01: hard resetting link
+
[  18.268039] ata7.01: SATA link down (SStatus 0 SControl 320)
+
[  18.268039] ata7.02: hard resetting link
+
[  18.592035] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[  18.592035] ata7.03: hard resetting link
+
[  18.916033] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
+
[  18.916033] ata7.04: hard resetting link
+
[  19.240022] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+
[  19.240022] ata7.05: hard resetting link
+
[  19.564028] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
+
[  19.564028] ata7.06: hard resetting link
+
[  19.888023] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
+
[  19.892023] ata7.00: configured for UDMA/100
+
[  19.900026] ata7.02: configured for UDMA/100
+
[  19.908023] ata7.03: configured for UDMA/100
+
[  19.908023] ata7.04: ATA-8: ST3750330AS, SD15, max UDMA/133
+
[  19.908023] ata7.04: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
+
[  19.912025] ata7.04: configured for UDMA/100
+
[  19.912025] ata7.05: unsupported device, disabling
+
[  19.912025] ata7.05: disabled
+
[  19.912025] ata7: EH complete
+
[  21.992022] ata8: SATA link down (SStatus 0 SControl 0)
+
[  21.995918] scsi 6:0:0:0: Direct-Access    ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
+
[  21.996073] sd 6:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
+
[  21.996155] sd 6:0:0:0: [sdb] Write Protect is off
+
[  21.996169] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
+
[  21.996170] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  21.996170] sd 6:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
+
[  21.996170] sd 6:0:0:0: [sdb] Write Protect is off
+
[  21.996170] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
+
[  21.996170] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  21.996170]  sdb: sdb1
+
[  22.028074] sd 6:0:0:0: [sdb] Attached SCSI disk
+
[  22.028074] scsi 6:2:0:0: Direct-Access    ATA      WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
+
[  22.028074] sd 6:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
+
[  22.028074] sd 6:2:0:0: [sdc] Write Protect is off
+
[  22.028074] sd 6:2:0:0: [sdc] Mode Sense: 00 3a 00 00
+
[  22.028074] sd 6:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  22.028074] sd 6:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
+
[  22.028074] sd 6:2:0:0: [sdc] Write Protect is off
+
[  22.028074] sd 6:2:0:0: [sdc] Mode Sense: 00 3a 00 00
+
[  22.028074] sd 6:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  22.028074]  sdc: sdc1
+
[  22.028074] sd 6:2:0:0: [sdc] Attached SCSI disk
+
[  22.028074] scsi 6:3:0:0: Direct-Access    ATA      ST380013AS      3.05 PQ: 0 ANSI: 5
+
[  22.028074] sd 6:3:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
+
[  22.028074] sd 6:3:0:0: [sdd] Write Protect is off
+
[  22.028074] sd 6:3:0:0: [sdd] Mode Sense: 00 3a 00 00
+
[  22.028074] sd 6:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  22.028074] sd 6:3:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
+
[  22.028074] sd 6:3:0:0: [sdd] Write Protect is off
+
[  22.028074] sd 6:3:0:0: [sdd] Mode Sense: 00 3a 00 00
+
[  22.028074] sd 6:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  22.028074]  sdd: sdd1
+
[  22.028074] sd 6:3:0:0: [sdd] Attached SCSI disk
+
[  22.028074] scsi 6:4:0:0: Direct-Access    ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
+
[  22.028074] sd 6:4:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
+
[  22.028074] sd 6:4:0:0: [sde] Write Protect is off
+
[  22.028074] sd 6:4:0:0: [sde] Mode Sense: 00 3a 00 00
+
[  22.028074] sd 6:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  22.028074] sd 6:4:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
+
[  22.033608] sd 6:4:0:0: [sde] Write Protect is off
+
[  22.033608] sd 6:4:0:0: [sde] Mode Sense: 00 3a 00 00
+
[  22.033608] sd 6:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+
[  22.033608]  sde: sde1
+
[  22.048076] sd 6:4:0:0: [sde] Attached SCSI disk
+
[  22.050423] NFORCE-MCP77: 0000:00:06.0 (rev a1) UDMA133 controller
+
[  22.050480] NFORCE-MCP77: IDE controller (0x10de:0x0759 rev 0xa1) at  PCI slot 0000:00:06.0
+
[  22.050566] NFORCE-MCP77: not 100% native mode: will probe irqs later
+
[  22.050624] NFORCE-MCP77: IDE port disabled
+
[  22.050676]    ide0: BM-DMA at 0xf000-0xf007
+
[  22.050727] Probing IDE interface ide0...
+
[  22.051837] udev: renamed network interface eth0 to eth1
+
[  22.062092] udev: renamed network interface eth1_rename to eth0
+
[  22.786370] hda: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive
+
[  23.122307] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
+
[  23.122853] hda: MWDMA2 mode selected
+
[  23.123289] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
+
[  23.140424] hda: ATAPI 24X DVD-ROM drive, 512kB Cache
+
[  23.140592] Uniform CD-ROM driver Revision: 3.20
+
[  23.207561] PM: Starting manual resume from disk
+
[  23.254539] kjournald starting.  Commit interval 5 seconds
+
[  23.254539] EXT3-fs: mounted filesystem with ordered data mode.
+
[  24.020642] udevd version 125 started
+
[  24.366012] input: Power Button (FF) as /class/input/input0
+
[  24.386009] ACPI: Power Button (FF) [PWRF]
+
[  24.386009] input: Power Button (CM) as /class/input/input1
+
[  24.418009] ACPI: Power Button (CM) [PWRB]
+
[  24.619876] ACPI: WMI: Mapper loaded
+
[  24.722006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+
[  24.724479] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+
[  24.802641] input: PC Speaker as /class/input/input2
+
[  24.999399] Error: Driver 'pcspkr' is already registered, aborting...
+
[  25.360533] Adding 7815580k swap on /dev/sda6.  Priority:-1 extents:1 across:7815580k
+
[  25.650030] EXT3 FS on sda5, internal journal
+
[  26.226842] loop: module loaded
+
[  29.171250] kjournald starting.  Commit interval 5 seconds
+
[  29.171844] EXT3 FS on sda1, internal journal
+
[  29.171844] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.226248] kjournald starting.  Commit interval 5 seconds
+
[  29.227842] EXT3 FS on sda8, internal journal
+
[  29.227842] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.291250] kjournald starting.  Commit interval 5 seconds
+
[  29.291963] EXT3 FS on sda7, internal journal
+
[  29.292047] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.359119] kjournald starting.  Commit interval 5 seconds
+
[  29.359842] EXT3 FS on sda9, internal journal
+
[  29.359842] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.462657] kjournald starting.  Commit interval 5 seconds
+
[  29.463845] EXT3 FS on sda11, internal journal
+
[  29.463845] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.527761] kjournald starting.  Commit interval 5 seconds
+
[  29.527843] EXT3 FS on sda10, internal journal
+
[  29.527848] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.598648] kjournald starting.  Commit interval 5 seconds
+
[  29.599930] EXT3 FS on sda12, internal journal
+
[  29.599930] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.671230] kjournald starting.  Commit interval 5 seconds
+
[  29.671930] EXT3 FS on sda14, internal journal
+
[  29.671930] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.735461] kjournald starting.  Commit interval 5 seconds
+
[  29.735695] EXT3 FS on sda13, internal journal
+
[  29.735695] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.753404] kjournald starting.  Commit interval 5 seconds
+
[  29.755689] EXT3 FS on sdc1, internal journal
+
[  29.755689] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.782589] kjournald starting.  Commit interval 5 seconds
+
[  29.783931] EXT3 FS on sdb1, internal journal
+
[  29.783931] EXT3-fs: mounted filesystem with ordered data mode.
+
[  29.811323] kjournald starting.  Commit interval 5 seconds
+
[  29.815957] EXT3 FS on sde1, internal journal
+
[  29.815957] EXT3-fs: mounted filesystem with ordered data mode.
+
[  32.797359] NET: Registered protocol family 10
+
[  32.797359] lo: Disabled Privacy Extensions
+
[  43.266589] eth1: no IPv6 routers present
+

Revision as of 00:29, 23 January 2013

pony.noise is a headless Linux box at Noisebridge.


Contents

Refreshing pony.noise/juke

To refresh jukebox once you've added new stuff at /data/d2/music/, either:

  • go to pony.noise/juke, config, login, config, 'update db' (bottom right of popup), or
  • log in to ssh://juke:noisebridge@horsy.noise, run ncmpc, hit control-u

... and then wait. It take a while to update the database.

Access

  • From the main Noisebridge network, the IP address is 172.30.0.30, and DNS has it at pony.noise.
  • From the Internet or the noisebridge-dsl wifi, a NAT port is forwarded from pony.noisebridge.net.

SSH information

RSA key fingerprint is 9d:af:f4:94:70:65:ab:b2:af:a1:ad:03:2b:36:e6:43.

With the following stanza in ~/.ssh/config, you can ssh pony from outside, and ssh pony.local from inside.

Host pony | pony.local
   Hostname pony.noisebridge.net
   ForwardAgent no
   ForwardX11 no

Accounts

If you want an account:

1) Create an account on this wiki.

2) Log in to it and go to your User page. You can get to your User page from the link with your new account name at the top of any wiki page.

3) Add whatever info to your User page that you'd like to have there.

4) Add public PGP key information to your User page (described below)

To add a SSH Key and an Adduser stanza to your User: page on the wiki; see User:Adi or User:Rubin110 or User:Miloh for examples. Then introduce yourself on the [rack] mailing list for an account. Any Noisebridge member who agrees to be excellent to each other is welcome to an account. All users get sudo apt-get access; additional administration duties will be shared as necessary (asking nice works better then threatening to root the box).

Here is a tutorial on generating keys for and configuring ssh

Requests to change a user's shell after the account has been created will require a personal favor or a Double Dare. (Or you can simply use chsh.)

Full sudoers (updated 20100222):

Backups

There Are No Backups.

Specs

(Runs in a VM on Stallion, I believe)

  • 2GB RAM
  • 3-core 64-bit AMD CPU at 2.1 GHz
  • 750GB system drive
  • 2.5 TB data drives in eSATA chassis (/d1, /d2, /d3)
  • Debian Lenny (5.0 stable) 32-bit install

df -h

Filesystem            Size  Used Avail Use% Mounted on
/dev/vda5             3.0G  1.5G  1.4G  54% /
tmpfs                 990M     0  990M   0% /lib/init/rw
udev                  985M  132K  985M   1% /dev
tmpfs                 990M     0  990M   0% /dev/shm
/dev/vda1             194M   33M  152M  18% /boot
/dev/vda9             2.0G   69M  1.9G   4% /tmp
/dev/vda6             6.9G  5.6G  1.1G  85% /usr
/dev/vda7             6.9G  1.4G  5.2G  21% /var
/dev/vda8             5.0G  1.9G  2.9G  40% /var/log
/dev/mapper/pony--data-home
                      504G  183G  296G  39% /home
/dev/mapper/pony--data-d
                      1.8T  1.5T  223G  87% /data
/dev/mapper/pony--data-www
                      9.9G  222M  9.2G   3% /var/www

O&M

Restart Procedure:

Use the IP PDU documented on the Network page.

Personal tools