RepRap: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
(→‎Plan: fix broken abbrs to be wikipedia links)
Line 19: Line 19:
== Plan ==
== Plan ==
* decide what system to build
* decide what system to build
** what print materials?  ABS, <abbr title="polycaprolactone">PCL</abbr> aka Shapelock, <abbr title="polylactic acid">PLA</abbr>, ...
** what print materials?  ABS, [http://en.wikipedia.org/wiki/Polycaprolactone PCL] aka Shapelock, [http://en.wikipedia.org/wiki/Polylactic_acid PLA], ...
** multiple print heads?
** multiple print heads?
** what chassis design?  (lasercut acrylic, plywood + steel rod, ...)
** what chassis design?  (lasercut acrylic, plywood + steel rod, ...)

Revision as of 22:15, 20 October 2008

From reprap.org:

Reprap image from reprap.org
RepRap is short for Replicating Rapid-prototyper. It is the practical self-copying 3D printer shown on the right - a self-replicating machine. This 3D printer builds the parts up in layers of plastic. This technology already exists, but the cheapest commercial machine would cost you about €30,000. And it isn't even designed so that it can make itself. So what the RepRap team are doing is to develop and to give away the designs for a much cheaper machine with the novel capability of being able to self-copy (material costs are about €500).

The RepRap project is a bit optimistic in their description -- their "self-replicating" machine is capable of printing all of the non-commodity parts of their machine, but still needs stepper motors, steel rods, screws, nuts, control circuitry, and of course a human to assemble the pieces.

Links

Participants

Plan

  • decide what system to build
    • what print materials? ABS, PCL aka Shapelock, PLA, ...
    • multiple print heads?
    • what chassis design? (lasercut acrylic, plywood + steel rod, ...)
    • control electronics design (something better than "one Arduino to rule them all" please)
  • purchase parts
  • build it!

Some parts of RepRap can be developed independently. In particular, the Extruder "print head" is pretty much independent of the chassis mechanism, and looks like a fun project. Might want to consider other print mechanisms too; this one may be specific to a few of the thermoplastics.

The Builders wiki has some very useful content.