MaxNCMill

This one, right? http://www.maxnc.com/maxnc_10_cl-b.htm

Manual: http://engineering.purdue.edu/AAE/Academics/Courses/Raisbeck/images/resources/cnc/MAXNCmanual.pdf

Parallel Port Pinout (?): (from http://www.machsupport.com/forum/index.php?action=dlattach;topic=1319.0;attach=891)

1............... M3 OUTPUT (LOW=ON, PULSE FOR PWM)
2…………………………................. A AXIS (quadrature)
3……………………………............. A AXIS (quadrature)
4.……………………………............ Y AXIS (quadrature)
5.……………………………............ Y AXIS (quadrature)
6.…………………………….............X AXIS (quadrature)
7……………………………............. X AXIS (quadrature)
8..……………………………........... Z AXIS (quadrature)
9...…………………………….......... Z AXIS (quadrature)
Pin 10. INPUT, MOVE ENABLE (LOW=NORMAL OPERATION, HIGH=STOP)
Pin 16. OUTPUTS, DISABLE POWER TO MOTORS (LOW = NORMAL, HIGH = DISABLE)
Pin 17. OUTPUT, RESET CONTROLLER (LOW=RESET, HIGH=NORMAL)