Maker Faire Build Night 2015-02-26: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
(Created page with "This is part of the Noisebridge Booth for Maker Fair 2015 project The project continues. We started with the task of gathering a couple test materials ...")
 
No edit summary
Line 3: Line 3:
The project continues.
The project continues.


We started with the task of gathering a couple test materials and building our test pieces for the table top.
INTRO
[[File:Materials Ready 2015-02-12 .jpg|none|640px|thumb|resin, spray adhesive, stir sticks, gloves, cups, pigment]]
 
TAP Plastics recommended Ultra-Glo resin for this project. Apparently this resin can also be used to finish the wood on the table so we can go right over the resin and wood together to give the final table top a smooth flush surface. The finished table based on the design so far will end up needed about 110 oz of resing to make the Noisebridge logo.
[[File:Peeling the mylar 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Ambient light 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Calling in a ringer 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:El wire 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[Getting better 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Perparing to solder 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Test caulk 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Test clear 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Test pearl 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Test red 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT
 
[[File:Wire coloring 2015-02-26 .jpg|none|640px|thumb|CAPTION]]
TEXT

Revision as of 23:13, 2 March 2015

This is part of the Noisebridge Booth for Maker Fair 2015 project

The project continues.

INTRO

CAPTION

TEXT

CAPTION

TEXT

CAPTION

TEXT

CAPTION

TEXT

none|640px|thumb|CAPTION TEXT

CAPTION

TEXT

CAPTION

TEXT

CAPTION

TEXT

CAPTION

TEXT

CAPTION

TEXT

CAPTION

TEXT