Homebrew PCB: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
Line 16: Line 16:
==Progress==
==Progress==


We ended spending most of the time just designing the circuit. Here is the [http://fuzzybunny.s3.amazonaws.com/meep/useless.sch Eagle CAD schematic], the [http://fuzzybunny.s3.amazonaws.com/meep/useless.brd Eagle board layout], or, if you don't have Eagle, a [http://fuzzybunny.s3.amazonaws.com/meep/useless.pdf pdf] of it. It has an ATTiny, a button, an led, and a speaker. It can be programmed to do things. Look!
===Saturday, July 25th, 2009===
 
We ended up spending most of the time just designing the circuit. We based it on the [[Logo|Noisebridge logo]], incorporating a series of resistors, a speaker, and for fun, an ATTiny25, an LED, and a micro switch.  It can be programmed to do things!  Look!  Here's the [http://fuzzybunny.s3.amazonaws.com/meep/useless.sch Eagle CAD schematic], the [http://fuzzybunny.s3.amazonaws.com/meep/useless.brd Eagle board layout], or, if you don't have Eagle, a [http://fuzzybunny.s3.amazonaws.com/meep/useless.pdf PDF].
 


[[Image:Useless.png|400px]]
[[Image:Useless.png|400px]]
There are a few ideas floating around for how the ATTiny25 can be programmed.  One is for the LED to always be on, and for the speaker to make noise when the center button is pressed.  It has also been suggested that the speaker play a song (London Bridges Falling Down?).


We then tried transferring it to a solid copper board by printing onto magazine paper and then ironing that onto the board (we lacked the proper transfer film). This sorta worked, but not good enough. We subsequently learned that the magazine paper method works best if, after the paper is ironed to the copper, one wets the magazine with soapy water, loosening the fibers and leaving more toner stuck as you pull the paper off.
We then tried transferring it to a solid copper board by printing onto magazine paper and then ironing that onto the board (we lacked the proper transfer film). This sorta worked, but not good enough. We subsequently learned that the magazine paper method works best if, after the paper is ironed to the copper, one wets the magazine with soapy water, loosening the fibers and leaving more toner stuck as you pull the paper off.

Revision as of 21:36, 25 July 2009

Homebrew Printed Circuit Boards

What Where When

We met at Noisebridge on Saturday, July 25th at 3pm and designed some circuit boards.

We planned to follow a procedure not unlike this:

http://www.make-digital.com/make/vol02/?pg=166&pm=2&u1=friend

Who

Progress

Saturday, July 25th, 2009

We ended up spending most of the time just designing the circuit. We based it on the Noisebridge logo, incorporating a series of resistors, a speaker, and for fun, an ATTiny25, an LED, and a micro switch. It can be programmed to do things! Look! Here's the Eagle CAD schematic, the Eagle board layout, or, if you don't have Eagle, a PDF.


Useless.png


There are a few ideas floating around for how the ATTiny25 can be programmed. One is for the LED to always be on, and for the speaker to make noise when the center button is pressed. It has also been suggested that the speaker play a song (London Bridges Falling Down?).


We then tried transferring it to a solid copper board by printing onto magazine paper and then ironing that onto the board (we lacked the proper transfer film). This sorta worked, but not good enough. We subsequently learned that the magazine paper method works best if, after the paper is ironed to the copper, one wets the magazine with soapy water, loosening the fibers and leaving more toner stuck as you pull the paper off.

Next

We try to get some real transfer sheets or, failing that, try the magazine method with the extra soapy water bath stage. Failing both, we get as far as we can with the magazine, then touch up the print with a sharpie and finally etch these dang boards!

We will try to meet Monday evening and do some super elite circuit hacking of our own! You are welcome to join. Time is only so far defined as vague eveningish.

After next

Profit.