Install addressable LED lighting combined with sparing use of cfl, halogen or incandescent.
What Will Be Done
- Remove anything in the category of 'crap' from the ceilings
- Prep / paint ceiling
- Install dc power supplies
- Install LED fixtures
- Install microcontrollers
- Install other fixtures w/ relay switching from micros
- Install networking equipment
- Install touchscreen control panels
- Install sensor packs
- Run ac power to dc power supplies
- Branch dc to led fixtures
- Connect fixtures to controllers
- Connect LED subnet to main network through router
- Wait ~1 month
- Remove any unused florescent tube fixtures
- Install diffusion on remaining florescent tube fixtures
Here is a working ceiling plan for this project, It will be updated with the above as the project develops.
What Areas in the Space Will This Affect
Who Will Be Doing It
Why This Will Be Good
The new lighting system will be much more pleasing to work under. It would use less energy, especially if combined with sensors and automation to turn down or off unused lights. It would provide hardware for hacking on. It will be super hi-tech and becoming of a hackerspace.
Why This Will Be Bad
It is new tech and could take longer, or be more expensive than planned. This will be the second time for me to install this in a building. People who hack the computer controlled lights might instruct them to display patterns that are annoying to others. It might be too awesome.
How Long Will It Take
A similar job took 3 months to complete. Depends on other construction. Would roll out in stages.
In A Fantastic World, What Extra Budget Would You Like
A fundraising effort will be executed to provide the 5-15k needed. (No use of Noisebridge general fund) We will install as many stages as are funded. I would like help with the ac power distribution.
Are There Any Other PFAs This Would Work Well With
Are There Any Other PFAs This Would Contradict