Flashrd: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 33: | Line 33: | ||
entry point at 0x200120</pre> | entry point at 0x200120</pre> | ||
To boot the older flash images, "boot -s" and then "/stand/rc". | To boot the older flash images, "boot -s" and then "/stand/rc". If you need to use the network, remember to do "pfctl -d". |
Revision as of 17:00, 15 August 2010
Installation notes
Download the flashrd binary images.
Backup the existing flash cards using dd.
dd the new flashrd images to the existing flash cards.
Mount the flash cards or boot the flash card using qemu, modify /etc/ttys as follows:
19c19 < tty00 "/usr/libexec/getty std.9600" unknown off --- > tty00 "/usr/libexec/getty std.9600" vt220 on secure
Add this to /flash/etc/boot.conf: (/flash is on /dev/wd0a)
set timeout 5 set tty com0
Plug the flash cards into the existing devices, boot as follows:
boot> set tty com0 switching console to com0 >> OpenBSD/i386 BOOT 3.02 boot> boot booting hd0a:/bsd: 10707316+1055248 [52+360656+344597]=0xbe4014 entry point at 0x200120
To boot the older flash images, "boot -s" and then "/stand/rc". If you need to use the network, remember to do "pfctl -d".