Editing Darkroom/BW Film Development

==Basic Instructions==

# In complete darkness, roll your film into a tank.
# Turn on safelight or house lights, as your paranoia permits.
# Rinse film by filling tank with water a couple times.
# Measure out developer according to chart A (I think this chart doesn't exist yet --[[User:Hurtstotouchfire | Kelly]]) and bring it to a given temperature, and measure out stop solution. ([http://www.digitaltruth.com/devchart.php The Massive Dev Chart] - times are in minutes)
# Add developer to tank and agitate it for a given amount of time, also according to chart A.
# Pour developer down drain or into a separate jug according to reusability of product.
# Add stop solution to tank. Rinse, agitate or soak for 30 sec - 2 min, according to your philosophy.
# Pour stop bath back into original jug. (we will have to periodically make a fresh stop bath)
# Rinse step with plain water. (at this point you can take your time and expose the film to light if you need to)
# Measure and add fixer.
# Return fixer to fix jug. (again, periodic refreshment of jug contents is necessary)
# Rinse step. Add water to tank and agitate gently. Here's the important part:
# Pour water from fix rinse into ''Special Disposal Jug''.
# Hypo or Flo or unicorn semen or whatever you use to cleanse and protect your film.
# Drying and praying against the anti-dust gods. You may also want to use the [[Darkroom/Resources/Prinz Film Dryer | film dryer]].