CVA PCB Beta Rev0.1 Order: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
(New page: '¡CAVEAT EMPTOR!' There ARE mistakes on this board! If I knew what they were I would have fixed them. But there's only so much use in staring at a schematic, sooner or later I have to hav...)
 
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
'¡CAVEAT EMPTOR!'
OK. I just ordered 4 boards. More people than that expressed interest in a board, but I'm not confident enough in my PCB design skills to get too many of this Rev0.1.
There ARE mistakes on this board! If I knew what they were I would have fixed them. But there's only so much use in staring at a schematic, sooner or later I have to have something physical to test out. Be prepared for a bit of pin-bending to make things fit, and - I hope unlikely but not impossible - getting out an x-acto knife and some jumper wires cuz I got a trace or two wrong. This is Beta Rev 0.1 for a reason.


 
If you wanted one and the current is not enough, you should consider you might be best off waiting for Rev1. I can also of course send you the files and you can order one yourself.
1. Check out the [http://sensebridge.net/cva/eagle/schematic090503.png schematic].
 
2. Decide what of those components you do or don't want.
 
3. Add a new row with your name, how many PCB panels you want, and what components you want (entering "ALL", "ALL except EEPROM" or the like is fine if it's clear what you mean).
 
4. I will update with a price.
 
5. Check back and confirm.
 
6. Wait patiently.
 
7. Be proud to be an elite beta tester.
 
{| border="1" cellspacing="0" cellpadding="5" align="center"
|-
! Name
! CVA PCB Beta Rev 0.1
$15-$30?
! Components
< $45 w/compass?, <$15 w/o compass?
|-
|Skory
|2
| 2 x ALL except HM55B compass chip
|-
|}

Latest revision as of 11:38, 7 May 2009

OK. I just ordered 4 boards. More people than that expressed interest in a board, but I'm not confident enough in my PCB design skills to get too many of this Rev0.1.

If you wanted one and the current is not enough, you should consider you might be best off waiting for Rev1. I can also of course send you the files and you can order one yourself.

Retrieved from "https://www.noisebridge.net/index.php?title=CVA_PCB_Beta_Rev0.1_Order&oldid=4957"